The Complete Guide to Fabric Care and Storage

LUCINE Complete Guide to Material-Specific Care and Storage | Freshwater Pearl, Natural Stone, SV925, 14kgf, Resin, 316L

Care & Storage Guide

To Enjoy Your Jewelry Beautifully for Years to Come

— Complete Guide to Material-Specific Care and Storage —

A Quiet Manual for Everyday Care

The jewelry you wear every day has its own unique charm and character depending on the material. The soft luster of freshwater pearls, the distinctive presence of natural stones, the warmth of SV925, the subdued gold of 14kgf, the lightness of resin, and the dignified white of 316L—each requires care suited to its material to preserve its beauty for as long as possible. In this guide, we have summarized the key points, care instructions, and things to avoid for six representative materials used at LUCINE in the simplest terms possible.

Section 01

Freshwater Pearl / Baroque Pearl

Material characteristics.Due to its soft, multi-layered structure (nacre), it is a delicate material that is sensitive to acids, sweat, dryness, and friction. Baroque pearls are appealing for their organic forms, with no two exactly alike.

Care

  • After wearing, gently wipe dry with a soft, dry cloth.
  • Apply perfume, hairspray, and cosmetics first. Put on the jewelry only after they have completely dried.
  • Avoid washing with water, using an ultrasonic cleaner, or using abrasives.

Storage

  • Store individually in a cloth bag or case.
  • Avoid extreme dryness and high heat and humidity. Keeping indoor humidity around 40–60% is recommended.

Section 02

Natural Stone

Material characteristics.Properties vary greatly depending on the stone. While you can enjoy the one-of-a-kind character of each piece, proper care greatly affects its lifespan.
Quartz

Quartz

Amethyst, rose quartz, etc. With a hardness of 7, they are relatively resistant to scratches, but be careful of strong impacts and sudden temperature changes.

Porous

Porous / Soft Stones

Turquoise, lapis lazuli, malachite, opal, etc. Avoid water, chemicals, and ultrasonic cleaning. Watch out for fading and whitening.

Care

  • After wearing, wipe off sweat and oils, and store away from direct sunlight.
  • If washing, use a diluted neutral detergent for a short time. Wipe off immediately and dry completely.
  • For porous stones, it is safer not to wash them with water.
  • Some stones may fade when exposed to strong UV rays for long periods, so do not leave them in direct sunlight.

Section 03

SV925 (Sterling Silver)

Material characteristics.92.5% silver + 7.5% other metals. While it tarnishes (turns black) easily due to sulfur in the air and sweat, light discoloration can be restored by polishing.

Care

  • After wearing, wipe off oils and sweat with a soft cloth.
  • For light discoloration, use a dedicated silver polishing cloth. For deep discoloration, consult a specialist or use silver polish (on non-stone parts only).
  • Do not use silver polish on items with stones or rhodium plating (it will damage the stones and coating).

Storage

  • Store individually in an airtight bag (PE / PP) to reduce exposure to air.
  • Using silica gel or discoloration-prevention paper is also effective.

Section 04

14kgf (Gold Filled)

Material characteristics.A "gold-filled" material with a thick layer of 14K gold bonded to the base metal. The gold layer must be at least 1/20 of the total weight, offering better color retention and wear resistance than standard plating (※Metal allergies vary by individual).

Care

  • After use, wipe off oils with a soft cloth and store in a dry place.
  • Avoid strong abrasives, chemicals, and sulfur-containing products.
  • Avoid rubbing against hard objects and impacts. For safety, remove the jewelry when working out or sleeping.

Section 05

Resin

Material characteristics.Lightweight and highly versatile in terms of molding, resin is a popular choice for metal-allergy-friendly jewelry. However, it is weak against UV rays, high heat, and solvents, and its low surface hardness makes it prone to scratches.

Care

  • Avoid direct sunlight and high heat and humidity (bathrooms, cars).
  • Wipe off dirt with a soft cloth. If wiping with water, wring it out thoroughly first.
  • Do not use alcohol, disinfectant wipes, solvents, or ultrasonic cleaning (causes whitening and cracking).

Section 06

316L Surgical Stainless Steel

Material characteristics.Resistant to sweat, water, and everyday wear, with excellent resistance to discoloration and rust. It is less likely to cause metal allergies (※This does not guarantee that it will not cause a reaction).

Care

  • Wiping dry is generally sufficient. If exposed to saltwater or chemicals, rinse with water and dry completely.
  • Handle polished surfaces gently with a soft cloth. Strong friction can cause fine scratches.
  • Color treatments such as PVD may thin over time due to wear.

Section 07

Seasonal Care Tips

Summer

Summer

A season when sweat and oils increase. Make wiping jewelry after returning home a habit. Be mindful of contact with perfume and sunscreen.

Winter

Winter

A season when heating dries out the air. Avoid over-drying pearls and certain natural stones, and aim for indoor humidity of 40–60%.

Rainy

Rainy Season

Use moisture-proof agents and rust-prevention paper wisely to prevent metal discoloration. Do not let them come into direct contact with the pearls.

Section 08

Common Don'ts (Good to Remember)

Things to avoid. Wearing jewelry in hot springs, pools, saunas, or during intense exercise. Using ultrasonic cleaners (on pearls, porous stones, resin, or adhesive areas). Using strong abrasives or metal polishes on stones, pearls, or plated/coated surfaces.

“A quick wipe every day and proper storage.
The inherent beauty of the material will last longer than you might think.”

Choose by Material

We offer collections in freshwater pearl, 14kgf, SV925, and allergy-friendly materials.

Pearl 14kgf SV925 Allergy-Friendly

Last updated : 2026.05 / Contact: info@lucine-jp.com